According to reports, IC Insights' latest global wafer production capacity report for 2010-2011 pointed out that Taiwanâ€™s semiconductor industry was only recently considered to be providing after-sales packaging and testing services. However, at present, Taiwan is no longer considered to be manufacturing wafers. Only the second source.
According to statistics, the total wafer production capacity in Taiwan this year has reached 2.66 million wafers per month, approximately 8 inch wafers, approaching 2.71 million wafers with the world's largest wafer capacity. IC Insights estimates that the total wafer production capacity in Taiwan will be expected to reach 3 million units next year, which will surpass Japan's 2.78 million units and will leapfrog to the world's largest wafer production capacity.
IC Insights also expects that the total wafer production capacity in Taiwan will reach 4.08 million units in 2015, which will account for 25% of the total wafer production capacity in the world, and Japan will account for about 18% of the global wafer production capacity; Taiwan will further increase the distance between Japan and Japan. .
ICInsights stated that Taiwan has widely provided foundry services such as IC design factories, light fabs, and electronic systems factories, and as a result, the proportion of wafer production capacity in the world has continuously increased.
DIM to warm spot led/DIM To Warm led Spot Light to use light-emitting diodes as a light source for lighting. Use more traditional halogen spotlights, low luminous efficiency, more power, increased by exposure to ambient temperature, short life. DIM To Warm led Spot Light source on the light emitting principle, energy saving, environmental protection level is far superior to traditional lighting. And the formation of unidirectional LED glowing light distribution for lighting the perfect support.
Currently LED as light source lamps made more and more, DIM To Warm Led Spot Light is one of the most acclaimed LED spotlights, as compared with other LED lamps, LED spotlights lower prices.
1. DIM To Warm led Spot Light can be driven using a low voltage DC,like led par30,led par38: a load of small, weak interference advantages of the use of environmental requirements are lower.
2. DIM To Warm led Spot Light can better control the spectral composition of light emission, which can be good for museums and galleries in the local or accent lighting.
3. LED lighting luminous point is very strong: light attenuation is much lower than traditional light sources, LED lighting prices civilians. 4. LED spotlights response time is very fast: in the microsecond level, as long as the switch is opened, will be bright, no delay and flicker.
5. DIM To Warm led Spot Light highly concentrated light energy emitted: concentrated in a smaller wavelength window, high purity.
6. A very long life: generally between 50 000 -10 million hours, because LED is a semiconductor device, even frequent switching, will not affect the service life.
DIM To Warm led Spot Light Application:
Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, For DIM To Warm led Spot Light we apply the CE, RoHS and SAA certificate for our led lighting product.
DIM To Warm led Spot Light
Dim To Warm Spot Light,White Dim To Warm Spot Light,Dim Warm Spot,Led Dim To Warm
Shenzhen Mingxue Optoelectronics CO.,Ltd , http://www.mingxueled.com